PEEK tube with outer diameter 1.6mm and inner hole 0.75mm

PEEK materials are widely used in analytical instruments, semiconductor industry, medical...

PEEK model and color:

1. PEEK5600G (brown gray/khaki) is made of pure polyetheretherketone resin, which has the best toughness and impact resistance among all PEEK grades. PEEK can be sterilized by convenient methods (steam, dry heat, ethanol and Y-rays), and the raw materials used to make PEEK comply with the food compatibility regulations of the EU and the US FDA. These characteristics make it widely used in the medical, pharmaceutical and food processing industries.

2. PEEK-5600LF30 (black) is a bearing grade plastic after adding PTFE, graphite and carbon fiber. Its superior friction properties (low friction coefficient, wear resistance, and higher peak pressure limit) make it an ideal material for this level of friction applications.

3. PEEK-5600GF30 (brown gray): This material is a reinforced plastic filled with 30% glass fiber. It has better rigidity and creep resistance than PEEK5600G, as well as better dimensional stability. It is ideal for manufacturing structural parts. It can withstand fixed loads for a long time at high temperatures. If PEEK-5600GF30 is used as a sliding part, its adaptability should be carefully checked because glass fiber scratches the mating surface.

4. PEEK-5600CF30 (black) This material is filled with 30% carbon fiber reinforcement. It has better mechanical properties (higher elastic modulus, mechanical strength and creep) and is more wear-resistant than PEEK-5600GF30. In addition, carbon fiber reinforced plastic has 3.5 times the thermal conductivity of unreinforced PEEK plastic and dissipates heat from the bearing surface faster.

PEEK specifications: The following units are all millimeters (mm), except for 1/16 and 1/32, which are special inches.

Serial number	Outside diameter x inside diameter	Serial number	Outside diameter x inside diameter	Serial number	Outside diameter x inside diameter	Serial number	Outer diameter * inner diameter
1	Φ0.40 ×Φ0.30	25	Φ1.60 ×Φ0.50	49	4.1×1.8D-shaped tube	73	Φ10.56×Φ10.26
2	Φ0.50 ×Φ0.40	26	Φ1.60 ×Φ0.75	50	Φ4.70 ×Φ2.30	74	Φ10.62×Φ 9.82
3	Φ1/32inch×Φ0.25	27	Φ1.60 ×Φ1.00	51	Φ4.95 ×Φ4.15	75	Φ10.82×Φ 9.82
4	Φ0.90 ×Φ0.70	28	Φ1.60 ×Φ1.20	52	Φ4.95 ×Φ4.25	76	Φ10.96×Φ10.66
5	Φ1.20 ×Φ1.00	29	Φ1.75 ×Φ1.40	53	Φ4.95 ×Φ4.55	77	Φ11.00×Φ 8.00
6	Φ1.25 ×Φ0.90	30	Φ1.80 ×Φ1.10	54	Φ5.00 ×Φ4.20	78	Φ11.65×Φ10.00
7	Φ1.30 ×Φ0.90	31	Φ1.80 ×Φ1.00	55	Φ5.10 ×Φ1.90	79	Φ12.00×Φ10.00
8	Φ1.35 ×Φ0.95	32	Φ1.80 ×Φ1.50	56	Φ5.90 ×Φ3.00	80	Φ12.00×Φ 6.00
9	Φ1.35 ×Φ1.05	33	Φ1.80 ×Φ1.60	57	Φ5.90 ×Φ3.90	81	Φ12.00×Φ 4.00
10	Φ1.40 ×Φ1.20	34	Φ1.90 ×Φ1.70	58	Φ6.00 ×Φ4.00	82	Φ12.00×Φ 9.50
11	Φ1.40 ×Φ1.15	35	Φ1.90 ×Φ1.60	59	Φ6.00 ×Φ3.00	83	Reinforcement Φ12×Φ11
12	Φ1.50 ×Φ1.00	36	Φ2.00 ×Φ1.00	60	Φ6.17 ×Φ5.82	84