PEEK Dead Volume-free High Pressure Fitting

1. High pressure resistance, up to 130MPa, ordinary PEEK joints can withstand pressure of about 30MPa. 2. The front PEEK plane seal has no dead volume and no residue.

Get Quote

1. High pressure resistance, up to 130MPa, ordinary PEEK joints can withstand pressure of about 30MPa.
2. The front PEEK plane seal has no dead volume and no residue.
3. The capillary is replaceable and has a long service life.
4. Various lengths can be customized according to customer requirements.

Product Specification Sheet

Capillary ID(mm)	A-Length (mm)	B-OD	C-OD	Item No.
0.12	150	1/16″(1.6mm)	1/32″(0.8mm)	JHJZ-1215
0.12	200	1/16”(1.6mm)	1/32″(0.8mm)	JHJZ-1220
0.12	250	1/16″(1.6mm)	1/32″(0.8mm)	JHJZ-1225
0.12	300	1/16″(1.6mm)	1/32”(0.8mm)	JHJZ-1230
0.12	400	1/16″(1.6mm)	1/32”(0.8mm)	JHJZ-1240
0.12	450	1/16″(1.6mm)	1/32″(0.8mm)	JHJZ-1245
0.12	550	1/16″(1.6mm)	1/32″(0.8mm)	JHJZ-1255
0.12	700	1/16″(1.6mm)	1/32”(0.8mm)	JHJZ-1270
0.12	900	1/16″(1.6mm)	1/32″(0.8mm)	JHJZ-1290
0.17	150	1/16″(1.6mm)	1/32”(0.8mm)	JHJZ-1715
0.17	200	1/16″(1.6mm)	1/32”(0.8mm)	JHJZ-1720
0.17	250	1/16″(1.6mm)	1/32”(0.8mm)	JHJZ-1725
0.17	300	1/16″(1.6mm)	1/32”(0.8mm)	JHJZ-1730
0.17	400	1/16″(1.6mm)	1/32″(0.8mm)	JHJZ-1740
0.17	450	1/16″(1.6mm)	1/32”(0.8mm)	JHJZ-1745
0.17	550	1/16″(1.6mm	1/32”(0.8mm)	JHJZ-1755
0.17	700	1/16″(1.6mm)	1/32”(0.8mm)	JHJZ-1770
0.17	900	1/16″(1.6mm)	1/32”(0.8mm)	JHJZ-1790

Side Sealing Detailed Drawing

Installation Diagram
1.Prepare for capillary;
2.Place the capillary from the fitting position intothe centre of the fitting;
3.Place the plug into the capillary tube;
4.Plug pressed into fitting inside hole;
5.0nce assembled, screw directly into thecolumn and tighten, Advisable torque of 0.3N.m.