日期: 2024-07-20
What are the high and low temperature resistance characteristics of PEEK
PEEK has excellent heat resistance and a melting point of up to 343°C. Since PEEK is a semi-solid thermoplastic, it can still maintain excellent mechanical properties near the melting point, which is very rare in plastics. At the same time, PEEK can withstand low temperatures for a long time and can be used as a component of liquid nitrogen equipment.
2024-07-20 | FAQ | Tags: PEEK raw materials
What are the advantages of PEEK
Features and advantages: ◆ High temperature resistance ◆ Wear resistance ◆ Self-lubrication ◆ Corrosion resistance ◆ High strength ◆ Easy processing ◆ Hydrolysis resistance ◆ Flame retardant ◆ Low smoke and non-toxic ◆ Electrical performance ◆ Radiation resistance ◆ Dimensional stability
2024-07-20 | FAQ, FAQs about PEEK | Tags: PEEK raw materials, PEEK rods
What are the corrosion resistance characteristics of PEEK
1. PEEK can tolerate almost any chemical except fuming concentrated sulfuric acid, and it can maintain good chemical stability even at higher temperatures. It has strong resistance to chemical corrosion and is usually used to manufacture parts that work in harsh environmental conditions or need to withstand frequent disinfection (such as chemical storage tanks and medical devices that need to be disinfected with strong oxidant hydrogen peroxide). 2. Although PEEK polymer has been widely regarded as a material that can withstand extremely strong chemical corrosion, of course, whether PEEK can withstand a certain corrosive medium is also related to the crystallinity of the PEEK parts, the residual internal stress, and the temperature and concentration of the medium in contact with…
2024-07-20 | FAQ, FAQs about PEEK | Tags: PEEK raw materials
What are the hydrolysis resistance characteristics of PEEK
Among all engineering plastics, PEEK has the best resistance to hot water and steam. PEEK polymer and its composite products (i.e., modified by glass fiber, carbon fiber, graphite, PTFE, etc.) can resist chemical damage caused by water or high-pressure steam, can be used continuously in hot water and high-pressure steam conditions, and still maintain good mechanical properties.
2024-07-20 | FAQ, FAQs about PEEK | Tags: PEEK water resistance
12mm thick PEEK plate
Main features of PEEK sheet: 1: High temperature resistance. The long-term use temperature of UL certification in the United States is 260℃. Even if the temperature…
2024-07-20 | PEEK Shapes, PEEK Sheets, Products, Shapes | Tags: PEEK sheets
PEEK5600CF30 sheet
Main features of PEEK sheet: 1: High temperature resistance. The long-term use temperature of UL certification in the United States is 260℃. Even if the temperature…
2024-07-20 | PEEK Shapes, PEEK Sheets, Products, Shapes | Tags: PEEK sheets
15mm thick PEEK anti-static sheet
There are nearly 100 kinds of extrusion dies with complete specifications and available in stock all year round. Anti-static PEEK board is resistant to high temperature.
2024-07-20 | PEEK Shapes, PEEK Sheets, Products, Shapes | Tags: PEEK sheets
27mm×19mmPEEK pipe
The PEEK tube produced by continuous extrusion process solves the problem of height limitation of molded products and internal defects easily generated by injection molding…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes
OD Φ214mm PEEK5600CF30 tube
1. High temperature resistant PEEK has a high glass transition temperature and melting point (334°C), which is why it can be used in heat resistant…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes
65mm×62mm PEEK thin-walled tube
The PEEK tube produced by continuous extrusion process solves the problem of height limitation of molded products and internal defects easily generated by injection molding…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes
Φ62mm×38mmPEEK pipe
The PEEK tube produced by continuous extrusion process solves the problem of height limitation of molded products and internal defects easily generated by injection molding…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes
Φ86mm×Φ54mmPEEK pipe
The PEEK tube produced by continuous extrusion process solves the problem of height limitation of molded products and internal defects easily generated by injection molding…
2024-07-20 | PEEK Shapes, PEEK Tubes, Products, Shapes | Tags: PEEK pipes